In development, in internal beta. Sinker is being tested by the team and is not open to testers outside it yet. It is not part of 9.26.17, the version you can download today. In this beta the boxes travel through a folder you choose on a cloud drive you already use, for example Google Drive. At the official release Sinker will have a dedicated server. There is no date yet.
Push and Pull

Two buttons, and a word that tells you which one

Sinker Push sends a project from this Mac. Sinker Pull receives it on the other one. Each project shows its state in one word, so you know which button to press before you press it.

  • To send, To receive, Same, Never sent, Changed on both
  • One project at a time, or all the ones that changed in a row
  • The same buttons sit on each project row of the Command Center
Sinker
VXOST Nov 22, 2026 · 10:42:07 AM Command Center Sinker Speed Pinger Gateway Time Tracker Folder: My Drive/vxost-sinker · checked at 10:40 (seen from this Mac) Check Sinker Push for 1 project Sinker Pull for 1 project example-shop To send Changed on this Mac after the last Sinker Push Sinker Push client-site To receive Sent from the laptop, yesterday at 23:10 Sinker Pull my-blog Same Same on both Macs since 20 Nov
An exact copy

The whole folder, not just what Git carries

Git carries the code. Sinker carries everything else too: the project folder as it is on disk, .git, node_modules, vendor, the .env file and the uploads included, the databases of the project, and its VXOST settings, the port and the PHP version. You leave something out only if you choose to, project by project.

  • The databases are exported, then loaded and checked on the other Mac
  • Port and PHP version are applied after a Pull, with your password
  • A project that did not change since the last Push or Pull is skipped
sinker
THIS MAC · example-shop example-shop/ .git/ node_modules/ vendor/ uploads/ .env database: example_shop port 4000 · PHP 8.4 locked here Sinker folder only locked boxes
Encryption

Locked on your Mac, before anything leaves it

The first Mac that uses Sinker creates a key, and VXOST shows it to you as a recovery code. Copy it, or save it to a file, and keep it in a protected place: your password manager, or a printed sheet, but not in the Sinker folder or the same cloud drive. On the second Mac you paste it once.

Every box is encrypted on the Mac before it is written to the folder, so the folder only ever holds locked boxes. If you lose the code and lose your Macs, the boxes cannot be opened again, not even by us.

Sinker
VXOST Nov 22, 2026 · 10:42:07 AM Command Center Sinker Speed Pinger Gateway Time Tracker Your recovery code EXAMPLE-K7QM-2HXA-9RTD-WJ4C-PN6B Copy Save to a file… Keep it away from the Sinker folder and from the same cloud drive. I have put it aside
Nothing lost in silence

The old version is put aside, never thrown away

Before a Sinker Pull replaces a project, the version that was on this Mac is put aside. Sinker never deletes these copies by itself: you delete the ones you no longer need. Before anything starts, a sheet tells you in short sentences what is about to change, and you choose Proceed or Cancel.

  • One operation at a time: while Sinker works, another one cannot start
  • If a Pull stops halfway, VXOST puts the project back as it was, and if it cannot, it locks the project and deletes nothing
  • If the folder holds a newer version from your other Mac, Sinker says so before you send over it
  • Changed on both Macs: you choose which one to keep
Sinker
VXOST Nov 22, 2026 · 10:42:07 AM Command Center Sinker Speed Pinger Gateway Time Tracker Sinker Pull: client-site WHAT HAPPENS The folder on this Mac is replaced and put aside The database client_site is replaced Port 4002 and PHP 8.2: macOS asks for your password at the end Cancel Proceed

It looks by itself, and waits for you

With the automatic check on, Sinker looks at the folder from time to time and when you come back to VXOST, and the Command Center tells you how many projects are waiting. It never starts a Push or a Pull on its own: there is no server deciding for you, operations start when you click. The switch is on the Sinker row of the Command Center.

Sinker is not a backup. It keeps the last three sends of each project in the folder, enough to carry work between your Macs, not to go back months. Keep your backups as you keep them today.

How it works

  1. Choose the folder. A folder on a cloud drive that both Macs see, for example My Drive/vxost-sinker in Google Drive.
  2. Create the key on the first Mac and put the recovery code aside.
  3. Press Sinker Push on the project you worked on. It is packed, locked and written to the folder.
  4. On the other Mac, paste the code once, then press Sinker Pull when the project says To receive.
  5. Give your password at the end. macOS asks for it to set the port and the PHP version, and the project answers on the same port as on the first Mac. After a Pull of several projects, use Apply port and PHP on each one.

Follow it in the changelog

Sinker will be announced there when it opens beyond the team. Until then, 9.26.17 runs your projects on each Mac.

v9.26.17Updated November 2026Free · app and dashboard GPL