- Home
- Speed
How fast is your connection, really?
Measure your ping, download and upload right here, in about twenty seconds. Then see what the Speed tab of the VXOST app adds: how your Mac is connected, read on the Mac itself.
Speed test
- Ping
- Download
- Upload
- Done
- Ping
- Jitter
- Download
- Upload
- Your public IP, as this site sees it
- Data used by this test, about
Each test downloads for about ten seconds and uploads for about ten seconds. On a fast line that can add up to a few gigabytes, so on a metered connection think before you start.
The speed test needs a more recent browser. The rest of this page still explains what the Speed tab of the app does.
The test goes through Cloudflare's network to our server, a single machine in Europe. On a very fast line, or far from Europe, the number can be limited by the server and the distance rather than by your connection. Upload counts only the data the server confirmed it received. Ping here is the time a small web request takes to go and come back, so it reads a little higher than a network ping.
How the Mac is connected, without asking the internet
The Speed tab of the app starts from your own machine. It shows whether the Mac is on Wi-Fi, on a cable or on a hotspot, how strong the Wi-Fi signal is, which IPv4 address the Mac has on your local network, and the speed of the link between the Mac and the router. All of it is read on the Mac, and none of it needs an internet connection.
- Wi-Fi, wired or hotspot, as macOS reports it
- The signal in words: excellent, good, weak or poor
- The address a phone on the same Wi-Fi would use to reach your projects
Download, upload and public IP, when you ask
Below that, the Internet card measures the connection beyond the router: download and upload in Mbps, and the public IP address the internet sees. It talks to the same three small scripts this page uses, on this site, and only after you click Start measurement. Nothing is measured in the background.
- About ten seconds at most for download, and the same for upload
- The time of the last measurement and the data it used
- The result stays on your Mac
Lighter on a phone's data plan
When the Mac is on a hotspot, such as an iPhone shared over Wi-Fi or over a cable, the app asks before measuring, says roughly how much data it will use, and measures with much less: at most a few tens of megabytes, where a home or office line can take a few hundred.
- A hotspot is a connection macOS treats as metered
- You confirm before it starts
The test on this page cannot tell what kind of line you are on, and always measures at full size.
How the test on this page works
- Ping. Twelve small requests go to the server one after the other. The first is left out, and the page shows the middle value of the rest and how much they vary, the jitter.
- Download. Four downloads of random data run together for about ten seconds, starting small and growing on a fast line. The first moment is not counted, while the connection gets up to speed.
- Upload. Three uploads of random data run together for about ten seconds, starting small so that even a slow line finishes some. Only the data the server confirms it received is counted, and then thrown away.
- Result. Bytes that really arrived, divided by the time they took. If a step fails, or the connection stalls for a few seconds, it shows no number for that step.
Nothing about the test is saved: no result, no address list, no cookie of ours, only the ordinary access log every web server keeps. The details are in the privacy policy.
Try VXOST on your Mac
The full stack and the app, in one download.